LED顯示屏控制計算機自動開關機BIOS設置
1.
The
first step, when computer is starting, and then click ”Delete” button to enter
the BIOS setup.
首先在啟動計算機時,按“Delete”鍵進入BIOS界面。
2.
As
soon as the BIOS dialogues appear in the main page of BIOS setup select “Power
Management”, and you’ll see the sub-menu 在BIOS設置主界面中選擇“Power Management Setup”菜單,進入電源管理窗口。
3.
In
default condition,“At the option of Automatic Power Up, some computer is set Resume by
Alarm(定時開機,有些機器選項為Resume By Alarm)”The option is disabled. Move your cursor to
this option, and press “PageUp” or “PageDown” to switch Disable or Enable. Then
set the time and date for auto boot at option of Date (of month) Alarm” and “Time(hh:mm:ss)
Alarm” 選項是關閉的,將光標移到該項,用PageUp或PageDown翻頁鍵將“Disabled”改為“Enabled”,而后在“Date (of Month) Alarm”和“Time (hh:mm:ss) Alarm”中分別設定開機的日期和時間。
4.
If the
“Date” is set as 0, then it will automatically boot at a certain time every day. After you finish
this setup, press “ESC” to get back at BIOS setup main page, click”Save and
Exit setup”, and press “Y” to save the CMOS setup and exit. Then the computer
will reboot, and setup is done. 如果“Date”設為0,則默認為每天定時開機。設置好后按“ESC”鍵回到BIOS設置主界面,點擊“Save Exit Setup”,按“Y”鍵保存CMOS設置退出,接著機器會重新啟動,這時便大功告成了。
5.
Of
course, the important point is that it requires the Mother board of your
computer’s compatibility/support. But most of the motherboards can support this
function. Furthermore, the setup will be more or less different from this
instruction, but almost the same.
6.
當然,值得注意的是定時開機需要您的主板支持才行,不過現在大多數主板都有這項功能。另外,不同的主板在設置上會不盡相同,不過都大同小異